Any solutions out there? I have tried this on both 32 and 64 bit Windows 7 OS's with the same results, Intouch version 10.1, service pack 3. Need to install a patch for Intouch. Know that it is on the internet, but unsure where to find it. Product Version: 10.1 ProdSp: SP3 OS: Win 2008 64 bit. The Home editions of Windows 7 are not supported, but both Professional and Ultimate 32 and 64 bit are supported for InTouch 10.1 with SP3 and InTouch 10.1 SP3 Patch 01. All previous versions of InTouch 10.1 and earlier are not supported with Windows 7. InTouch 10.1 SP3 and also Patch 01 are available for download from the Wonderware support site. There are also links to Wonderware's Compatibility Matrix where you can check all Wonderware products for OS Compatibility.
Midi genres/directions. Classic; pop; rock; rap; dance; punk; blues; country; movie themes; tv themes; christmas carols. Jefferson Airplane Somebody To Love - MIDI chords, midi, notes, tab, tablature and sheet music for piano, keyboard, organ, synth, flute by Da Tickler Somebody To Love - MIDI Jefferson Airplane piano and flute notes. Jefferson Airplane hits include Sketches Of China. AMCOS Licensed Popular related genres to Jefferson Airplane include Hits Of The 1980's, Hits Of The 1990's, Hits Of The 1960's, Hits Of The 1950's Midi Backing Tracks. Jefferson Airplane: Song: Somebody To Love: Details: Runs 3. Order Jefferson Airplane, Somebody To Love MIDI file or Browse our complete catalog. Close Window. Jefferson airplane somebody to love free midi.
GC-PX100 update This update improves the reliability of the record operation. Jvc everio powerdirector software download. DLA-X7, DLA-X9 firmware update This update addresses CEC Operation, HDMI 1.4 improvements, a Lens-shift direction of the ceiling mode, smoothness of the Color management adjustment, and improve the 2D to 3D (and 3D to 2D) mode switching DLA-HD350BU firmware update This update improves IR sensor detection DLA-HD750BU firmware update This update improves IR sensor detection and expands Color Management System adjustment range Everio and Camcorder GC-XA2 update This update improves the reliability of the social website connection.
Intouch 10.1 Sp3 Patch 1 Download
InTouch Version 10 Service Pack 2 Readme
Last revision: 12/22/2008
About This Readme
This Readme combines information from InTouch 10.0 Service Pack 2 (SP2) with previous Readme files
included with Wonderware® InTouch® version 10.0 and its prior service
pack and patches:
InTouch version 10.0.100 (SP1)
InTouch version 10.0.003 (Patch 03)
InTouch version 10.0.002 (Patch 02)
InTouch version 10.0.001 (Patch 01)
InTouch version 10.0 (No Patch)
The information from these Readme files is in order based on
when the InTouch versions were released.
Important!
1.
Before installing the Service Pack:
o
Ensure that you create good known backups of all applications and galaxies.
o
If you use the
InTouch application with ArchestrA Symbols, run the ArchestrA
Symbol Analys
is and Repair Utility and ensure all issues reported by the utility are
addressed.
2.
This service pack requires InTouch applications be converted (recompiled) prior to
running. You can convert stand
-
alone or published applications directly from WindowMaker.
You must convert managed InTouch applications by accessing WindowMaker through the IDE.
A development license must be present in the node to allow access to WindowMaker. After
conversion, applications cannot be opened or run using InTouch 10 versions olde
r than
InTouch 10 service pack 2. Ensure that application dependencies, such as ActiveX controls
and add
-
on functions) are installed to WindowMaker before you convert the application using
the IDE.
Applications that have existing corruptions may affect th
e conversion process.
3.
If InTouch 10.0x and Application Server 3.0x are installed on the same node, they both
must be upgraded to Application Server 3.0 SP2 and InTouch 10.0 SP2.
4.
Installing Wonderware Application Server 3.0 Service Pack 2 automatically
undeploys a
platform that is currently deployed in the node that is being updated. Managed applications
that are deployed to the platform are also
removed. See the section 'Applying SP2 to
Wonderware Application Server 3.0' in the Readme
for Application Se
rver 3.0 SP2 for full
details on installing the service pack.
5.
The workflow for importing windows from other applications has been modified. To
prevent manipulation of windows outside the supported environment, windows that are to be
imported into an InTou
ch application must be exported first from the existing application.
ONLY windows that are in an 'exported' state are allowed to be imported into an application.
6.
The Antivirus Software Issues list has been updated.
Click this
Antivirus Software Issues
link for details.
This Readme explains how to apply SP2 to InTouch version 10.0 and its previous service pack and patches.
This Re
adme lists all resolved issues in InTouch version 10.0 and the service pack and
patches. It also
includes descriptions of any known product issues that remain unresolved and possible interim solutions.
Use the following links to the various sections of th
is Readme.
InTouch Version 10.0 SP2 Information
Requirements to Apply InTouch 10.0 SP2
Antivirus Software Issues
Compatibility Requirements for InTouc
h 10.0 SP2
Applying SP2 to InTouch Version 10.0
Migrating Applications
to InTouch 10.0 SP2
Resolved Issues
-
InTouch Version 10.0 SP2
Known Issues
-
InTouch Version 10.0 SP2
InTouch Version 10.0 SP1 Information
R
equirements to Apply InTouch 10.0 SP1
Compatibility Requirements for InTouch 10.0 SP1
Applying SP1 to InTouch Version 10.0
Migrating Applications
to InTouch 10.0 SP1
Resolved Issues
-
InTouch Version 10.0 SP1
Kno
wn Issues
-
InTouch Version 10.0 SP1
InTouch Version 10.0 Patch 03 Information
Requireme
nts to Apply InTouch 10.0 Patch 03
Applying Patch 03 to InTouch Version 10.0
Resolved Issues
-
InTouch Version 10.0 Patch 03
Known Issues
-
InTouch Version 10.0 Patch 03
InTouch Version 10.0 Patch 02 Information
Requirements to Apply InTouch 10.0 Patch 02
Applying Patch 02 to InTouch Version 10.0
Upgrading Earlier Versions of InTouch to InTouch Version 10.0 Patch 02
Migrating Applicat
ions from Earlier
InTouch Versions to InTouch
10.0 Patch 02
Resolved Issues
-
InTouch V
ersion 10.0 Patch 02
InTouch Version 10 Patch 01 Information
Applying Patch01 to InTouch Versio
n 10
Resolved Issues
-
InTouch Version 10 Patch 01
Known Issues
-
InTouch Version 10 Patch 01
InTouch Documentation Issues
InTouch Version 10 Information
InTouch Version 10 Features
System Requirements
Upgrading from a Previous Version
Known Issues
–
InTouch HMI Version 10
InTouch HMI Documentation Issues
InTouch HMI Documentation
< top of document >
Requirements to Apply I
nTouch 10.0 SP2
This section describes the hardware and software requirements to install InTouch 10.0 SP2. Use the
following links for information about the original hardware and software requirements when InTouch version
10.0 was released in August 2007.
Hardware Recommendations
:
Hardware requirements remain unchanged since the initial release of InTouch version 10.0.
Software Requirements
:
Several Windows operating systems have had service pack updates since the initial release of InTouch
version 10.0. InTouch 10.0 SP2 also support
s Windows XP Pro Service Pack 3 and Windows Vista Service
Pack 1.
Important:
InTouch 10.0 SP2 does not support .NET Framework 2.0 SP1 nor .NET Framework 3.5. InTouch 10.0 SP2
only supports the versions of .NET Framework described in the original InTouch
10.0 Readme.
InTouch
10.0 SP2 requires Microsoft .NET Framework 2.0 at version CLR 2.0.50727.42, or .NET Framework 3.0.
< top of document >
Antivirus Software Issues
Configure the antivirus software such that the antivirus software does not process files in the following
ArchestrA folders:
C:
Program Files
ArchestrA
C:
Program Files
Common files
ArchestrA
C:
Program Files
FactorySuite
(may not exist in newer installations)
C:
Program Files
Wonderware
C:
InSQL
Data
From Application Server Platform objects:
History Store Forward directory: (if not default)
From Application Server Engine objects:
Checkp
oint directory location (if not default)
<InTouch Application folder path> including:
C:
Documents and Settings
All Users
Application Data
ArchestrA
<SMC Logger Storage file path>.
The default is:
C:
Documents and Settings
All Users
Application Data
Arc
hestrA
LogFiles
SQL server database type files
.mdf
.Ldf
< top of document >
Compatibility
Requirements for InTouch 10.0 SP2
If InTouch 10.0x and Application Server 3.0x are installed on the same node, they both must be upgraded
to Application Server 3.0 SP2 and InTouch 10.0 SP2.
< top of document >
Applying SP2 to InTouch Version 10.0
This section explains how to apply SP2 to existing instances of InTouch version 10.0 installed at
your site.
SP2 is distributed on a re
-
mastered InTouch version 10 product CD. Localized versions of the SP2 CD are
also available in different languages.
InTouch Version Requirements to Apply SP2
The following table shows how to apply SP2 to InTouch 10.0
and earlier versions of InTouch.
Current Installed
Version of InTouch
Description
Direct
Update with
SP2
Special Update
Requirements
InTouch version 8.0
SP2 Patch 04
InTouch version 8.0 Service Pack 2
with Patch 04 applied
Yes
Requires an InTouch
versio
n 10.0 license
InTouch version 8.0
TSE SP2 Patch 04
InTouch version TSE 8.0 Service Pack
2 with Patch 04 applied
Yes
Requires an InTouch
version 10.0 license
InTouch version 9.0
Patch 03
Base install of InTouch version 9.0
with Patch 03 applied
Yes
Requi
res an InTouch
version 10.0 license
InTouch version 9.0
TSE Patch 03
Base install of InTouch version 9.0
TSE with Patch 03 applied
Yes
Requires an InTouch
version 10.0 license
InTouch version 9.5
Patch 03 or SP2
Base install of InTouch version 9.5
with P
atch 03 or SP2 applied
Yes
Requires an InTouch
version 10.0 license
InTouch version 9.5
TSE Patch 03 or SP2
Base install of InTouch version 9.5
TSE with Patch 03 or SP2 applied
Yes
Requires an InTouch
version 10.0 license
InTouch version
10.0.000
Base in
stall of InTouch version 10.0
Yes
None
InTouch version
10.0.000 TSE
Base install of InTouch version 10.0
TSE
Yes
None
InTouch version
10.0.01
Base install updated with Patch 01
Yes
None
InTouch version
10.0.01 TSE
Base install of InTouch 10.0 TSE
u
pdated with Patch 01
Yes
None
InTouch version
10.0.002
Base install of InTouch 10.0 or
InTouch 10.0.01 updated with Patch
02
Yes
None
InTouch version
10.0.002 TSE
Base install of InTouch 10.0 TSE or
InTouch 10.0.01 TSE updated with
Patch 02
Yes
None
InT
ouch version
10.0.003
InTouch version 10.0 or InTouch
10.0.002 updated with Patch 03
Yes
None
InTouch version
10.0.003 TSE
InTouch version 10.0 TSE or InTouch
10.0.002 TSE updated with Patch 03
Yes
None
InTouch version 10.0
SP1
InTouch version 10.0
updat
ed with
SP1
Yes
None
InTouch version 10.0
SP1 TSE
InTouch version 10.0
updated with
SP1 TSE
Yes
None
Important SP2 Update Notes:
You must apply an InTouch version 10.0 Wonderware product license to upgrade a version of
InTouch prior to version 10.0 with
the SP2 re
-
mastered CD.
You must update InTouch version 10 to SP2 in the same language as your installed instance of
InTouch. If you attempt to update to SP2 with a different language than your installed instance of
InTouch, you may have to completely un
install and then reinstall InTouch.
You cannot re
-
install an earlier version of InTouch 10.0 after SP2 is applied. For example, the update
fails if you attempt to re
-
install InTouch 10.0 Patch 03 on an installed instance of InTouch version 10.0
SP2.
To u
pdate InTouch Version 10.0 with SP2
1.
Log on to the computer as an administrator.
2.
Close
Application Manager
,
WindowMaker
, or
WindowViewer
if they are running.
3.
Place the InTouch version 10 SP2 CD in the computer's CD
-
ROM drive or browse the folder where an
image of the SP2 CD has been copied.
4.
Using Windows Explorer, double
-
click on the Setup.exe file to start the update.
5.
Click
Next
in the
Welcome
dialog box.
6.
Accept the Wonderware license agreement and click
Next
.
7.
In the
Select Features and Destination F
older
dialog box, select the optional components, if any,
to install with InTouch, and then click
Next
.
8.
In the
Ready to Install Wonderware InTouch
dialog box, scroll the list to verify your InTouch
installation choices.
9.
Click
Next
to continue installing
InTouch on your computer.
The
Updating System
dialog box shows the progress of the SP2 update.
10.
If the
OS Configuration Utility
dialog box appears, click
OK
to continue installing SP2.
11.
Click
Finish
.
12.
Restart your computer.
13.
Verify that your instance of I
nTouch is at version 10.0.200 by completing the following procedure.
To verify InTouch Version 10.0 has been updated to Service Pack 2
1.
Start
Application Manager
.
2.
Click
Help
from the
Application Manager
menu bar.
3.
Click
About Application Manager
. The
Abo
ut InTouch Application Manager
dialog box shows
the InTouch version installed on the computer.
You should see
Version: 10.0 SP2
listed in the dialog box after SP2 is installed.
< top of document >
Migrating Applications to InTouch 10.0 SP2
All applications created from InTouch version 7.0 through InTouch 10.0 SP1 can be migrated directly to
InT
ouch 10.0 SP2. Applications created with InTouch prior to version 7.0 must be first converted to a
version 7.0 application and then migrated to InTouch 10.0 SP2.
You are required to migrate
your existing InTouch applications created with InTouch version 1
0.0 or its
service pack or
patches. The existing InTouch applications will be migrated to the new version of InTouch
10.0 SP2 when you open WindowMaker for the first time after installing the SP2.
< top of document >
Resolved Issues
-
InTouch Version 10.0 SP2
InTouch version 10.0 SP2 resolves the following issues. The issues are listed by their
Change Request
number:
L00080689
:
Memory consumption increases rapidly when you import new windows into a large
InTouch application. (See SR23930042)
L00080774
:
The error message “Compatible version of WindowMaker is not installed” appears when
you try t
o open an fnTouch Tpb application using the fab. Epee po24513243)
L00080775
:
If two windows are open in WindowViewer that have ActiveX AlarmTreeViewer controls
on each window, one window does not show any information. (See SR 103113133)
L00081535
:
When a
'While Showing' script runs every 500 milliseconds and writes data to the
Galaxy, memory consumption for the View.exe process increases 4k every 2/3
-
seconds. (See SR33410298)
L00082673
:
In a Terminal Server environment, the “Anonymous Engine ID” value i
s not being
releasedI or decremented when tindowsiewer itself terminates Eshuts down) the
terminal session. Epee po15314499)
L00083320
:
A GDI Object handle leak exists in WindowViewer when
a window that contains a text
object and a combo box is opened and
closed.
(See SR 103113472)
L00083685
:
Fast switching of ArchestrA pop
-
up Symbols
and normal user interaction with ArchestrA
symbols causes the
WindowViewer to crash. Doom 3 full download utorrent for iphone 6. (See SR24513590)
L00083733
:
InTouch:<Tagname>
remote references and custom properties
in ArchestrA symbols
are not updating when the InTouch WindowViewer is running on a Terminal Server
client session. (See SR23516653 and SR19416452)
L00083951
:
An InTouch tag assigned to a custom property can be written to and from multiple
Terminal Serv
ice sessions on the same physical client, running separate applications
with the same tagname defined.
(See SR10415014)
L00084011
:
The AlarmViewer control display lines show gaps if you scroll up and down. (See
SR33810560)
L00084049
:
You cannot close a
modeless ArchestrA pop
-
up Symbol
after installing Wonderware
Application Server 3.0 SP1. (See SR37510020)
L00084878
:
In a Terminal Services environment, an InTouch:Tagname (ArchestrA symbol) assigned
to a custom property can be written to and from multip
le sessions or from different
physical clients when the InTouch application is running and a client session is restarted
from a different client.
L00084935
:
When copying a group of graphic elements and pasting them on a different graphic, all
the element
s are not copied and pasted.
L00084955
:
The Visual Element Reference List (VERL) of a managed InTouch application can
become corrupted if WindowMaker is not gracefully shut down preventing
synchronization of the application information with the Galaxy Rep
ository.
L00084956
:
Visual Element Reference List (VERL) corruption can occur when you import
windows
from another managed InTouch
application that
has symbol references that have not
been updated due to renames or deletions.
L00085031
:
The wrong symbol
s are shown at run time upon deploy changes.
L00085119
:
If an ArchestrA IDE is closed before saving a window with an embedded ArchestrA
Symbol in an
InTouchApp, a crash of the IDE occurs, when you click on an ArchestrA
Symbol after restarting the Archestr
A IDE.
L00085368
:
Custom properties for ArchestrA symbols
do not work if the graphic symbol is placed
beyond the 2000 by 2000 pixel region. (See SR103113360)
< top of document >
Known Issues
-
InTouch Version 10.0 SP2
This section describes known issues identified in InTouch version 10.0 SP2.
L00081320
:
'Load changes to WindowViewer' does no
t work for managed InTouch applications. The
process always
prompts you to restart WindowViewer rather than automatically loading
the changes.
L00086172
:
MX references should read and
write values, when the application is running on a
Terminal Services cl
ient session and the application is restarted on the Console.
L00086256
:
In a Terminal Services client session, direct remote references in ArchestrA symbols
(e.g. InTouch:AccessName1:IO100) linked to DDE Access Names do not
work;
however, references pl
aced in InTouch windows work.
L00087126
:
WindowMaker crashes while converting a managed application that has an ActiveX
reference, if the corresponding ActiveX control is not installed to WindowMaker.
Install ActiveX controls and add
-
on functions before
accessing WindowMaker.
Add
-
on functions are a set of script functions not included with the InTouch HMI. You
can get them from the Wonderware Knowledge Base CD and Technical Support sites.
You add these functions to the InTouch installation folder to ma
ke them available in the
application. When you open or migrate an application on a computer that does not have
the add
-
on functions installed, then the system may treat them as tag names and
attempt to define them as tag names, which will
corrupt the appli
cation.
L00087647
:
A WindowViewer client application containing graphic symbols fails to restart the first
time if a master application directory is unavailable on the Network Application
Development node. Red errors are logged in the System Management
Console.
Restarting the WindowViewer application works, even if the master application directory
is
unavailable.
Last revision: 12/22/2008
About This Readme
This Readme combines information from InTouch 10.0 Service Pack 2 (SP2) with previous Readme files
included with Wonderware® InTouch® version 10.0 and its prior service
pack and patches:
InTouch version 10.0.100 (SP1)
InTouch version 10.0.003 (Patch 03)
InTouch version 10.0.002 (Patch 02)
InTouch version 10.0.001 (Patch 01)
InTouch version 10.0 (No Patch)
The information from these Readme files is in order based on
when the InTouch versions were released.
Important!
1.
Before installing the Service Pack:
o
Ensure that you create good known backups of all applications and galaxies.
o
If you use the
InTouch application with ArchestrA Symbols, run the ArchestrA
Symbol Analys
is and Repair Utility and ensure all issues reported by the utility are
addressed.
2.
This service pack requires InTouch applications be converted (recompiled) prior to
running. You can convert stand
-
alone or published applications directly from WindowMaker.
You must convert managed InTouch applications by accessing WindowMaker through the IDE.
A development license must be present in the node to allow access to WindowMaker. After
conversion, applications cannot be opened or run using InTouch 10 versions olde
r than
InTouch 10 service pack 2. Ensure that application dependencies, such as ActiveX controls
and add
-
on functions) are installed to WindowMaker before you convert the application using
the IDE.
Applications that have existing corruptions may affect th
e conversion process.
3.
If InTouch 10.0x and Application Server 3.0x are installed on the same node, they both
must be upgraded to Application Server 3.0 SP2 and InTouch 10.0 SP2.
4.
Installing Wonderware Application Server 3.0 Service Pack 2 automatically
undeploys a
platform that is currently deployed in the node that is being updated. Managed applications
that are deployed to the platform are also
removed. See the section 'Applying SP2 to
Wonderware Application Server 3.0' in the Readme
for Application Se
rver 3.0 SP2 for full
details on installing the service pack.
5.
The workflow for importing windows from other applications has been modified. To
prevent manipulation of windows outside the supported environment, windows that are to be
imported into an InTou
ch application must be exported first from the existing application.
ONLY windows that are in an 'exported' state are allowed to be imported into an application.
6.
The Antivirus Software Issues list has been updated.
Click this
Antivirus Software Issues
link for details.
This Readme explains how to apply SP2 to InTouch version 10.0 and its previous service pack and patches.
This Re
adme lists all resolved issues in InTouch version 10.0 and the service pack and
patches. It also
includes descriptions of any known product issues that remain unresolved and possible interim solutions.
Use the following links to the various sections of th
is Readme.
InTouch Version 10.0 SP2 Information
Requirements to Apply InTouch 10.0 SP2
Antivirus Software Issues
Compatibility Requirements for InTouc
h 10.0 SP2
Applying SP2 to InTouch Version 10.0
Migrating Applications
to InTouch 10.0 SP2
Resolved Issues
-
InTouch Version 10.0 SP2
Known Issues
-
InTouch Version 10.0 SP2
InTouch Version 10.0 SP1 Information
R
equirements to Apply InTouch 10.0 SP1
Compatibility Requirements for InTouch 10.0 SP1
Applying SP1 to InTouch Version 10.0
Migrating Applications
to InTouch 10.0 SP1
Resolved Issues
-
InTouch Version 10.0 SP1
Kno
wn Issues
-
InTouch Version 10.0 SP1
InTouch Version 10.0 Patch 03 Information
Requireme
nts to Apply InTouch 10.0 Patch 03
Applying Patch 03 to InTouch Version 10.0
Resolved Issues
-
InTouch Version 10.0 Patch 03
Known Issues
-
InTouch Version 10.0 Patch 03
InTouch Version 10.0 Patch 02 Information
Requirements to Apply InTouch 10.0 Patch 02
Applying Patch 02 to InTouch Version 10.0
Upgrading Earlier Versions of InTouch to InTouch Version 10.0 Patch 02
Migrating Applicat
ions from Earlier
InTouch Versions to InTouch
10.0 Patch 02
Resolved Issues
-
InTouch V
ersion 10.0 Patch 02
InTouch Version 10 Patch 01 Information
Applying Patch01 to InTouch Versio
n 10
Resolved Issues
-
InTouch Version 10 Patch 01
Known Issues
-
InTouch Version 10 Patch 01
InTouch Documentation Issues
InTouch Version 10 Information
InTouch Version 10 Features
System Requirements
Upgrading from a Previous Version
Known Issues
–
InTouch HMI Version 10
InTouch HMI Documentation Issues
InTouch HMI Documentation
< top of document >
Requirements to Apply I
nTouch 10.0 SP2
This section describes the hardware and software requirements to install InTouch 10.0 SP2. Use the
following links for information about the original hardware and software requirements when InTouch version
10.0 was released in August 2007.
Hardware Recommendations
:
Hardware requirements remain unchanged since the initial release of InTouch version 10.0.
Software Requirements
:
Several Windows operating systems have had service pack updates since the initial release of InTouch
version 10.0. InTouch 10.0 SP2 also support
s Windows XP Pro Service Pack 3 and Windows Vista Service
Pack 1.
Important:
InTouch 10.0 SP2 does not support .NET Framework 2.0 SP1 nor .NET Framework 3.5. InTouch 10.0 SP2
only supports the versions of .NET Framework described in the original InTouch
10.0 Readme.
InTouch
10.0 SP2 requires Microsoft .NET Framework 2.0 at version CLR 2.0.50727.42, or .NET Framework 3.0.
< top of document >
Antivirus Software Issues
Configure the antivirus software such that the antivirus software does not process files in the following
ArchestrA folders:
C:
Program Files
ArchestrA
C:
Program Files
Common files
ArchestrA
C:
Program Files
FactorySuite
(may not exist in newer installations)
C:
Program Files
Wonderware
C:
InSQL
Data
From Application Server Platform objects:
History Store Forward directory: (if not default)
From Application Server Engine objects:
Checkp
oint directory location (if not default)
<InTouch Application folder path> including:
C:
Documents and Settings
All Users
Application Data
ArchestrA
<SMC Logger Storage file path>.
The default is:
C:
Documents and Settings
All Users
Application Data
Arc
hestrA
LogFiles
SQL server database type files
.mdf
.Ldf
< top of document >
Compatibility
Requirements for InTouch 10.0 SP2
If InTouch 10.0x and Application Server 3.0x are installed on the same node, they both must be upgraded
to Application Server 3.0 SP2 and InTouch 10.0 SP2.
< top of document >
Applying SP2 to InTouch Version 10.0
This section explains how to apply SP2 to existing instances of InTouch version 10.0 installed at
your site.
SP2 is distributed on a re
-
mastered InTouch version 10 product CD. Localized versions of the SP2 CD are
also available in different languages.
InTouch Version Requirements to Apply SP2
The following table shows how to apply SP2 to InTouch 10.0
and earlier versions of InTouch.
Current Installed
Version of InTouch
Description
Direct
Update with
SP2
Special Update
Requirements
InTouch version 8.0
SP2 Patch 04
InTouch version 8.0 Service Pack 2
with Patch 04 applied
Yes
Requires an InTouch
versio
n 10.0 license
InTouch version 8.0
TSE SP2 Patch 04
InTouch version TSE 8.0 Service Pack
2 with Patch 04 applied
Yes
Requires an InTouch
version 10.0 license
InTouch version 9.0
Patch 03
Base install of InTouch version 9.0
with Patch 03 applied
Yes
Requi
res an InTouch
version 10.0 license
InTouch version 9.0
TSE Patch 03
Base install of InTouch version 9.0
TSE with Patch 03 applied
Yes
Requires an InTouch
version 10.0 license
InTouch version 9.5
Patch 03 or SP2
Base install of InTouch version 9.5
with P
atch 03 or SP2 applied
Yes
Requires an InTouch
version 10.0 license
InTouch version 9.5
TSE Patch 03 or SP2
Base install of InTouch version 9.5
TSE with Patch 03 or SP2 applied
Yes
Requires an InTouch
version 10.0 license
InTouch version
10.0.000
Base in
stall of InTouch version 10.0
Yes
None
InTouch version
10.0.000 TSE
Base install of InTouch version 10.0
TSE
Yes
None
InTouch version
10.0.01
Base install updated with Patch 01
Yes
None
InTouch version
10.0.01 TSE
Base install of InTouch 10.0 TSE
u
pdated with Patch 01
Yes
None
InTouch version
10.0.002
Base install of InTouch 10.0 or
InTouch 10.0.01 updated with Patch
02
Yes
None
InTouch version
10.0.002 TSE
Base install of InTouch 10.0 TSE or
InTouch 10.0.01 TSE updated with
Patch 02
Yes
None
InT
ouch version
10.0.003
InTouch version 10.0 or InTouch
10.0.002 updated with Patch 03
Yes
None
InTouch version
10.0.003 TSE
InTouch version 10.0 TSE or InTouch
10.0.002 TSE updated with Patch 03
Yes
None
InTouch version 10.0
SP1
InTouch version 10.0
updat
ed with
SP1
Yes
None
InTouch version 10.0
SP1 TSE
InTouch version 10.0
updated with
SP1 TSE
Yes
None
Important SP2 Update Notes:
You must apply an InTouch version 10.0 Wonderware product license to upgrade a version of
InTouch prior to version 10.0 with
the SP2 re
-
mastered CD.
You must update InTouch version 10 to SP2 in the same language as your installed instance of
InTouch. If you attempt to update to SP2 with a different language than your installed instance of
InTouch, you may have to completely un
install and then reinstall InTouch.
You cannot re
-
install an earlier version of InTouch 10.0 after SP2 is applied. For example, the update
fails if you attempt to re
-
install InTouch 10.0 Patch 03 on an installed instance of InTouch version 10.0
SP2.
To u
pdate InTouch Version 10.0 with SP2
1.
Log on to the computer as an administrator.
2.
Close
Application Manager
,
WindowMaker
, or
WindowViewer
if they are running.
3.
Place the InTouch version 10 SP2 CD in the computer's CD
-
ROM drive or browse the folder where an
image of the SP2 CD has been copied.
4.
Using Windows Explorer, double
-
click on the Setup.exe file to start the update.
5.
Click
Next
in the
Welcome
dialog box.
6.
Accept the Wonderware license agreement and click
Next
.
7.
In the
Select Features and Destination F
older
dialog box, select the optional components, if any,
to install with InTouch, and then click
Next
.
8.
In the
Ready to Install Wonderware InTouch
dialog box, scroll the list to verify your InTouch
installation choices.
9.
Click
Next
to continue installing
InTouch on your computer.
The
Updating System
dialog box shows the progress of the SP2 update.
10.
If the
OS Configuration Utility
dialog box appears, click
OK
to continue installing SP2.
11.
Click
Finish
.
12.
Restart your computer.
13.
Verify that your instance of I
nTouch is at version 10.0.200 by completing the following procedure.
To verify InTouch Version 10.0 has been updated to Service Pack 2
1.
Start
Application Manager
.
2.
Click
Help
from the
Application Manager
menu bar.
3.
Click
About Application Manager
. The
Abo
ut InTouch Application Manager
dialog box shows
the InTouch version installed on the computer.
You should see
Version: 10.0 SP2
listed in the dialog box after SP2 is installed.
< top of document >
Migrating Applications to InTouch 10.0 SP2
All applications created from InTouch version 7.0 through InTouch 10.0 SP1 can be migrated directly to
InT
ouch 10.0 SP2. Applications created with InTouch prior to version 7.0 must be first converted to a
version 7.0 application and then migrated to InTouch 10.0 SP2.
You are required to migrate
your existing InTouch applications created with InTouch version 1
0.0 or its
service pack or
patches. The existing InTouch applications will be migrated to the new version of InTouch
10.0 SP2 when you open WindowMaker for the first time after installing the SP2.
< top of document >
Resolved Issues
-
InTouch Version 10.0 SP2
InTouch version 10.0 SP2 resolves the following issues. The issues are listed by their
Change Request
number:
L00080689
:
Memory consumption increases rapidly when you import new windows into a large
InTouch application. (See SR23930042)
L00080774
:
The error message “Compatible version of WindowMaker is not installed” appears when
you try t
o open an fnTouch Tpb application using the fab. Epee po24513243)
L00080775
:
If two windows are open in WindowViewer that have ActiveX AlarmTreeViewer controls
on each window, one window does not show any information. (See SR 103113133)
L00081535
:
When a
'While Showing' script runs every 500 milliseconds and writes data to the
Galaxy, memory consumption for the View.exe process increases 4k every 2/3
-
seconds. (See SR33410298)
L00082673
:
In a Terminal Server environment, the “Anonymous Engine ID” value i
s not being
releasedI or decremented when tindowsiewer itself terminates Eshuts down) the
terminal session. Epee po15314499)
L00083320
:
A GDI Object handle leak exists in WindowViewer when
a window that contains a text
object and a combo box is opened and
closed.
(See SR 103113472)
L00083685
:
Fast switching of ArchestrA pop
-
up Symbols
and normal user interaction with ArchestrA
symbols causes the
WindowViewer to crash. Doom 3 full download utorrent for iphone 6. (See SR24513590)
L00083733
:
InTouch:<Tagname>
remote references and custom properties
in ArchestrA symbols
are not updating when the InTouch WindowViewer is running on a Terminal Server
client session. (See SR23516653 and SR19416452)
L00083951
:
An InTouch tag assigned to a custom property can be written to and from multiple
Terminal Serv
ice sessions on the same physical client, running separate applications
with the same tagname defined.
(See SR10415014)
L00084011
:
The AlarmViewer control display lines show gaps if you scroll up and down. (See
SR33810560)
L00084049
:
You cannot close a
modeless ArchestrA pop
-
up Symbol
after installing Wonderware
Application Server 3.0 SP1. (See SR37510020)
L00084878
:
In a Terminal Services environment, an InTouch:Tagname (ArchestrA symbol) assigned
to a custom property can be written to and from multip
le sessions or from different
physical clients when the InTouch application is running and a client session is restarted
from a different client.
L00084935
:
When copying a group of graphic elements and pasting them on a different graphic, all
the element
s are not copied and pasted.
L00084955
:
The Visual Element Reference List (VERL) of a managed InTouch application can
become corrupted if WindowMaker is not gracefully shut down preventing
synchronization of the application information with the Galaxy Rep
ository.
L00084956
:
Visual Element Reference List (VERL) corruption can occur when you import
windows
from another managed InTouch
application that
has symbol references that have not
been updated due to renames or deletions.
L00085031
:
The wrong symbol
s are shown at run time upon deploy changes.
L00085119
:
If an ArchestrA IDE is closed before saving a window with an embedded ArchestrA
Symbol in an
InTouchApp, a crash of the IDE occurs, when you click on an ArchestrA
Symbol after restarting the Archestr
A IDE.
L00085368
:
Custom properties for ArchestrA symbols
do not work if the graphic symbol is placed
beyond the 2000 by 2000 pixel region. (See SR103113360)
< top of document >
Known Issues
-
InTouch Version 10.0 SP2
This section describes known issues identified in InTouch version 10.0 SP2.
L00081320
:
'Load changes to WindowViewer' does no
t work for managed InTouch applications. The
process always
prompts you to restart WindowViewer rather than automatically loading
the changes.
L00086172
:
MX references should read and
write values, when the application is running on a
Terminal Services cl
ient session and the application is restarted on the Console.
L00086256
:
In a Terminal Services client session, direct remote references in ArchestrA symbols
(e.g. InTouch:AccessName1:IO100) linked to DDE Access Names do not
work;
however, references pl
aced in InTouch windows work.
L00087126
:
WindowMaker crashes while converting a managed application that has an ActiveX
reference, if the corresponding ActiveX control is not installed to WindowMaker.
Install ActiveX controls and add
-
on functions before
accessing WindowMaker.
Add
-
on functions are a set of script functions not included with the InTouch HMI. You
can get them from the Wonderware Knowledge Base CD and Technical Support sites.
You add these functions to the InTouch installation folder to ma
ke them available in the
application. When you open or migrate an application on a computer that does not have
the add
-
on functions installed, then the system may treat them as tag names and
attempt to define them as tag names, which will
corrupt the appli
cation.
L00087647
:
A WindowViewer client application containing graphic symbols fails to restart the first
time if a master application directory is unavailable on the Network Application
Development node. Red errors are logged in the System Management
Console.
Restarting the WindowViewer application works, even if the master application directory
is
unavailable.